Latest News
Full-Colour Blockout Window Graphics for The Urban...
The Urban Fox, an exciting new business set to open its doors in the heart of Lyme Regis, has transformed...
Anti-Slip Printed Floor Stickers R10 Slip Rating (Mostly Dry Use)
Anti-Slip Printed Floor Stickers R10 Slip Rating (Mostly Dry Use)
Social Distancing Printed Printed Anti-Slip Floor Vinyl Stickers R10 Slip Rating for Dry, Occasional Wet, Conditions. Scratch-resistant Print Short to Mid Term use. Indoor Use only. Pre-designed Floor Stickers to Government guidelines.
- Indoor Use / Easy Apply
- Anti-Slip to R10 rating
- Pre-designed options to choose from
- Designed to UK Government Guidelines
- Fast Turnaround
- Fully customisable upon request
Creative Solutions can provide printed anti-slip floor stickers for indoor use with an anti-slip rating of R10, which means that a person will probably slip on the material when the incline of the slope is greater than between 10° and 19°.
The printed floor stickers can be custom cut to any shape and design and are very simple for self-install onto most surfaces.
In response to the current social distancing measures we have pre-designed some floor vinyls in line with current government guidelines or they customised to your exact size requirements. Perfectly suited for indoor or outdoor use, our floor stickers are good for 6 months of use minimum.
Our durable floor graphics are suitable for most types of hard floor and short pile carpet, such as office floors, carpet, wood, tile and concrete surfaces.
Common uses of floor stickers include directional signs, and social distancing measures currently in place. We offer a range of designs to suit both the 1m and 2m guidelines. The floor sticker graphics are anti-scuff, meaning they can be walked on as a normal floor.
We have produced a standard range of social distancing floor stickers for immediate purchase, we can however tailor these to your requirements if you upload your artwork for the Anti-slip floor graphics.
We are providing a range of floor graphics, the details on these products are below so that you can make and informed decision for which type of anti-slip floor sticker you need for your situation.
We offer various un-laminated printed versions of the Anti-slip floor stickers that are perfect for smooth floors and short term applications, then we have higher specified floor stickers that can be used in environments where slipping may be an issue due to wet or angled surfaces. These have a more textured sticker surface and the adhesive used needs to be acrylic so as not to be affected by water when the floor graphic is applied to the floor.
Not sure?
Have Questions?
Anti-Slip Ramp Test (R) Ratings: DIN51130 Table
|
Anti-Slip Rating |
Slip Angle (Degrees°) |
Chance of Slip if Wet |
Suitable Conditions |
|---|---|---|---|
| R9 | 6 - 10° | High | Dry |
| R10 | 10 - 19° | Moderate | Mostly Dry |
| R11 | 19 - 27° | Moderate | Occasionally Wet |
| R12 | 27-35° | Low | Wet |
| R13 | 35° | Low | Very Wet |
Please contact us for information on alternative print or material options with a vider variety of anti-slip ratings.
Artwork and Design
Whether you’re a novice or a professional when it comes to artwork, we’re able to give you guidance or provide artwork templates for you to make sure your product is print perfect.
- Download the PDF template that matches your product selection.
- Upload your artwork here, or send it via email, or WeTransfer to our team.
- Our team will confirm they’ve received your files, and let you know the next steps.
For further information, please read our Artwork Preparation guide, or contact us here with your artwork questions. Alternatively, give us a call on 01297 630130.
Need help with your Anti-Slip Printed Floor Stickers R10 Slip Rating (Mostly Dry Use) design?
Why not use our in-house Graphic Design Team to help you make the most out of your Anti-Slip Printed Floor Stickers R10 Slip Rating (Mostly Dry Use)?
Our designers will work with you to create a professional design to your exact specifications. You can be as involved in the design process as you want to be, either working side by side with our designers or giving them your design brief. We will provide you with an artwork proof for you to approve and will never send your artwork to print without your final sign-off.
Unlike some other companies, we want to offer value for money, so we ensure that you are only charged for the actual time taken to create your design (minimum 15-minute intervals). Formatting a quick layout or checking over print-ready files may be free of charge. If more work is needed, we will contact you to discuss this.
Artwork Templates
How we can help your business
Latest News
Illuminating Dorchester: A Custom Projecting Circular...
At Creative Solutions, we take pride in helping businesses stand out, and our recent project for Sundorbon...
Latest News
Viewing Distances for UK Safety Signs: A Comprehensive...
Safety signs are a cornerstone of health and safety practices, ensuring clear communication of hazards,...
Similar Products
Join the Creative Newsletter
Subscribe to our newsletter and you'll be first to hear about our latest special offers, products and recent work.
R10 Anti-Slip Print Material Details
Stickyprints monomeric anti-slip floor vinyl 150mic - R10 Anti-Slip Rating
FOR FLOORS / CARPETS
Our superb anti-slip, digitally-printable floor vinyl can transform interior floor spaces with ease. This monomeric self-adhesive product boasts a premium surface texture that achieves R10 slip rating even when printed and is tough enough to last for all your short to medium-term floor graphic needs without the need to over-laminate. Just print and cut to create stunning floor graphics with the added benefit of an anti-slip finish - perfect for commercial and retail environments.
Stickyprints monomeric anti-slip floor vinyl 150mic Floor and Wall is an internal use, in mainly dry, but can cope with some wetness, but not regularly situation floor sticker vinyl that does not need lamination. The product is designed to be used for short to term applications in dry areas dependent on where the product is applied. It can be applied on top of carpeting, on walls, and on most smooth surfaces indoors.
- Tough, micro-patterned anti-slip vinyl, Textured, anti-slip finish (no lamination required)
- 150mic 150 Monomeric Soft-PVC
- Semi-permanent self-adhesive
- Can be cut to shape easily
- Good scratch resistance
- Suitable for most floor types including carpets, tiles, wood
- Post-printed anti-slip rating of R10, according to BS 7976-2 UKSRG Guidelines
Suitable Applications
- Short to Mid Term Application
- Internal Use Only
- POS Signage/ General Signage, Retail Outlets, Shop Floors, School Hallways, Classrooms, Educational establishments.
- Wall Graphics
- Floor Graphics - Applicable to floor tiles, PVC flooring, concrete/stone floor, wooden/laminated floors, carpets (low pile carpets but should be tested on a small area to prove performance)
Durability
This product has been designed for short-term interior floor graphics with an anti-slip finish without the need for over-lamination can tolerate damp/wet conditions due to the Anti-Slip rating.
Warranty
The product has been used in many places under all possible conditions and has proven its reliability and performance. Since there are endless possibilities on how and where the product is going to be applied all product warranty. automatically ends as soon as the liner is removed.
Fire behaviour
Self-extinguishing, adhered to stainless steel
Printing Method
We use environmentally friendly UV Print on this material due to the anti-scuff properties and speed of turnaround.
Technical Data
| Foil | 150 mic White Matte Monomeric soft-PVC |
| Adhesive | Water-based Semi-Permanent clear |
| Adhesive Adhesion | 25 μm ± 5 |
| Adhesive Total Weight | \ |
| Adhesive Slip-resistance DIN51130 | R10 |
| Adhesive Minimum Application Temperature | +10°C / +50°F |
| Durability (Unprinted) | Up to 3 - 4 years |
Disclaimer:
The following technical details are issued to the best of our knowledge, however, without any responsibility for results due to several different kinds of material and application processes. Therefore, we highly recommend that before every usage a test should be conducted on the original material.
What does the Anti-Slip 'R' Value Mean?
So what does R10, R12, R9 anti slip rating Mean and how does it affect a printed floor sticker or floor graphic?
The R ratings are a way of grading the slip resistance fot all sorts of floor surafaces, including floor stickers and floor graphics. It is important that you choose the correct anti slip gradng for your fllor stickers and floor graphics.
The 'R' in the name stands for ramp test, the lower the number (so R9) the lower the slip resiistance of the floor graphic. So any printed prduct you see with an R9 rating, has the smallest amount of slip resistance. These go up to R13 which is the resistance that would be required in areas such as public areas such as swimming pool showers where the floor will be wet, or domestic areas sucha s wetrooms.
The ratings of R9 and R10 are more commonly used in domestic situations, and in areas where there is a very low chance that the floor graphics will be subjected to damp and / or wet conditions
For commercial applications where there may be a chance that the floor sticker or graphic may get wet, aa higher slip rating is required. For this we would recommend the R12 Slip rating that we supply.
This is why for our Floor graphics, we use a material that is rated at R12, we recommend that you asses which slip rating you feel your anti-slip floor sticker will require before purchasing.
Anti-Slip Resistance Table and Suitable Applications
This way of rating slip resistance, across Europe rating anti-slip properties of floor tiles, and all the below is based on this. It is based on a German National Standard test method DIN51130.
This is the most commonly used method to grade the slip-resistance of a product, usually floor tiles but in our case it can be use for measuring the anti-slip properties of printed floor stickers and printed floor vinyls.
The table to the right denotes the 'R' rating method and the varying degrees of slope and applications where the floor graphics can be used.
Anti-Slip Ramp Test (R) Ratings: DIN51130 Table
| DIN51130 Anti Slip Table | R9 | R10 | R11 | R12 | R13 |
| Slip Angle (Degrees°) | 6 - 10° | 10 - 19° | 19 - 27° | 27-35° | 35° |
| Chance of Slip if Wet | High | Moderate | Moderate | Low | Low |
| Suitable Conditions | Dry | Mostly Dry | Occasionally Wet | Wet | Very Wet |
The above table provides the basic anti slip ramp test ratings. The parameters of the anti-slip test are based on the following parameters
- Shod foot, with cleated safety boots
- The surface is wet.
- The individual completing the test is attached with a harness for safety
- The angle of the ramp is adjusted whilst carrying out the test
- The degree ° at which the participant slips creates the above 'R' value ant-slip rating
The below information, gives more specific details on the printed floor stickers that we provide. We have supplied this information so that we give our customers all the information on our printed products so that they can make an informed decision on printed floor graphics.
We can source other materials to meet your printed anti-slip floor graphic requirements, we have researched the anti-slip print materials in great detail and have chosen what we feel to be the best product available at the best cost. We can source most print materials if there is a specific manufacturer and print process required to meet your, or your clients requirements.
Updating page...