Fiat Doblo 2010-2022 Chevrons
Fiat Doblo 2010-2022 Chevrons
Our self-fit chevron kits are designed and tested for fast, easy, and accurate installation. The Fiat Doblo 2010-2022 Chevron kit is supplied as flooded fluorescent yellow with Either red R3B Prismatic (Chapter 8) or Engineering grade vinyl.
- Creative Solutions Installation Service or DIY.
- Full range of kits to fit most current UK Vans and fleet vehicles.
- High-quality materials with MetaSure warranty.
- Full compliance with the Department of Transport Chapter 8 guidance (Prismatic Kits).
- Easy fast-fit design saving you time and money.
- Great value solution, we have done the hard work for you.
- Installation support and guidance from our expert team.
Our self-fit chevron kits are designed and tested for fast, easy, and accurate installation. Available in flooded fluorescent yellow with either red R3B Prismatic or Engineering grade vinyl, our kits come with either separately applied reds, numbered for easy positioning, or with the reds pre-applied. Each kit includes annotated visual guides and installation tips for seamless assembly. Plus, we include a pack of 12 red door reflectors (lozenges) for added visibility.
Complying with Department of Transport Chapter 8 safety guidelines, our kits feature high-quality, approved high conspicuity materials. We offer additional components like highway maintenance tape and reflective side tape for full Chapter 8 compliance.
Our chevron kits are renowned for their ease of fitting and durability, utilising only the finest materials for longevity, quality, and ease of installation.
Reds Applied - Chevron kits will have the flood yellow and red supplied separately, along with a numbered instruction sheet for easy installation to place the red diagonals in the correct order. You can opt to have the reds pre-applied to the yellow for a single-piece installation.
Installation Service - POA - Please note if you select 'Creative Solutions Installation', you will be required to be able to get your vehicle to our unit in Axminster, Devon. Please fill in the drop-down form and a member of our team will be in contact with pricing and information.
Which Grade Reflectivity Do I Need?
Prismatic Grade Reflective Red
Also referred to as retro-reflective material, Chapter 8 guidelines advocate for its usage when operating on roads with speed limits exceeding 40mph. The recent regulations stipulate R3B compliance certification for such material, which all our prismatic material meet, ensuring full compliance with regulations.
Engineering Grade Reflective Red
Our entry-grade material is tailored for roads with speed limits of 40mph and below. This grade material holds two levels of certification: R1 and R2. We exclusively offer R2-certified grade red, representing the highest quality attainable for a non-prismatic material. Engineering grade vinyls are great for traffic signage, cars, vans and lorries.
Air Release Vinyl Technology
All Chapter 8 & Chevron Kits are supplied on vinyl with air release technology. The vinyl has a microscopic weave invisible to the naked eye allowing for easy removal of air bubbles trapped under the vinyl during application. Simple apply pressure with your thumbs or squeegee tool to work out any trapped air.
High Visibility Vehicle Markings for Chapter 8 and Safety at Street Works
Specification
Chapter 8 Part 3 of the UK Highways Traffic Signs Manual, and the Safety at Street Works and Road Works Code of Practice, sets out guidelines for the use of high visibility conspicuity markings for vehicles stopping on all motorways, highways and roads. It is a best practice adopted by local authorities, highway construction and maintenance companies.
Conspicuity markings comprise of high visibility rear chevron markings of alternate strips of red reflective and fluorescent yellow non retro-reflective material. These chevrons should be spaced not less than 150mm width each, inclined at 45° (or up to 60°) to the horizontal and pointing upwards.
The reflective ensures nighttime conspicuity while the fluorescent yellow daytime. Chapter 8 Part 3 requires a high-grade R3B prismatic reflective for works vehicles on high-speed roads (>40mph), and R2 for lower-speed roads. Safety at Street Works and Road Works requires a red reflective which can be RA1, RA2 or R3B and is for non-motorway use.
Please refer to the Department for Transport website at www.dft.gov.uk for Chapter 8 and Safety at Street Works and Road Works full guidelines for rear chevrons, additional side markings and text markings.
Images for illustration purposes only. Kits available: Chapter 8 Kits
Join the Creative Newsletter
Subscribe to our newsletter and you'll be first to hear about our latest special offers, products and recent work.
Updating page...